Catalog Number: T-67117926

OEM Number: ADM55-45X57X7

PRODUCT TYPE: Double Wiper

Seal Profile: ADM55

Lip/Base Material: 95 TPU Polyurethane

PRODUCT SPECIFICATIONS

Series: ADM55
Inside Diameter: 1.772 Inch
Outside Diameter: 2.244 Inch
Material: 95 TPU Polyurethane

DESIGN SPECIFICATIONS

Double-acting
Slightly rounded sealing edge
Protruding wiper lip
Metal angle ring
Material: NBR, FKM, TPU

FUNCTION

Wiping off impurities on the piston rod during the retraction movement
Reduction of residual oil film due to second lip<
Metal angle ring ensures good fit in the installation space and prevents twisting
Pressure relief hole recommended for return of residual oil

PRODUCT ADVANTAGES

Good wiping properties against dirt
High wear resistance
Long service life
Axially open, easy-to-fabricate installation space
Reliable design with broad application spectrum for moderately demanding applications in general industry

COMMON APPLICATIONS

Mobile hydraulics
Particularly suitable for applications with heavy contamination

APPLICATION LIMITS
The values given here are maximum values and may not all be reached at the same time
TPU

Temperature [°C]: -30 to 100
Gliding speed [m/s]: max. 1

MEDIA RESISTANCE
TPU

Hydraulic oils according to DIN 51524 part 1-3
Lubricating oils
Lubricating greases based on minor oils
Flame-retardant hydraulic fluids HFA, HFB, HFC according to VCMA 24317

STORAGE ADVISE

Storage temperature <25°C
No direct heat sources
No direct sunlight
No condensation in the storage room
No exposure to ozone or ionizing radiation
Recommendations based on the revision of ISO 2230 dated 16.09.1992

Wipers are wear-resistant, long-lasting and keep dust and dirt particles from entering housings. They shield the hydraulic fluid from contaminants in addition to preventing harm to the sealing system. Double-acting wipers also leave behind an extra layer of leftover oil. For high exterior pollution, wipers with metal housings are especially well-suited because of their press-fit design. Numerous wipers that are compatible with a wide range of hydraulic cylinders are available under the TCM product brand. Maxtran. com is the trusted authorized source for TCM Hydraulic Seals Easily shop the largest inventory of TCM ADM55 Double Wiper Hydraulic Seals you need at the best deals with free shipping and our 30-day moneyback warranty. Our Double Wiper Seals measure 1. 772 Inch inside shaft diameter by 2. 244 Inch outside bore diameter and are produced from 95 TPU Polyurethane rubber that have excellent resistance to hydraulic fluids, oils, lubricants, and greases

MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.