NSK Part Number: 2319-K
The NSK 2319-K Double Row Self-Aligning Ball Bearing is an open-design, double-row rolling-element bearing designed for use in situations where there is angular misalignment or shaft displacement.
PRODUCT HIGHLIGHTS
Self-Aligning: The outer ring contains a shared spherical raceway, which allows the inner ring, balls, and cage to swivel and correct for slight shaft or housing misalignments without binding.
Clearance: The (C0) Standard and (C3) Extra internal clearance makes it ideal for settings in which temperature changes cause the shaft and housing to expand at different rates.
Performance: Self-aligning bearings have lower friction qualities than ordinary deep-groove ball bearings and run cooler even at high speeds.
Cage Materials: Equipped with a (M) Machined Brass, (E) Sheet Steel and (TVH, ETN9, TN) Plyamide (Nylon) for high strength and durability in demanding industrial environments.
Applications: Ideal for machine and heavy industrial applications where shaft alignment is difficult to maintain and where you have high radial loads and moderate to high speeds.
SERIES TYPE
The NSK 2319-K Double Row Self-Aligning Ball Bearing is an open-design, double-row rolling-element bearing designed for use in situations where there is angular misalignment or shaft displacement.
PRODUCT HIGHLIGHTS
Self-Aligning: The outer ring contains a shared spherical raceway, which allows the inner ring, balls, and cage to swivel and correct for slight shaft or housing misalignments without binding.
Clearance: The (C0) Standard and (C3) Extra internal clearance makes it ideal for settings in which temperature changes cause the shaft and housing to expand at different rates.
Performance: Self-aligning bearings have lower friction qualities than ordinary deep-groove ball bearings and run cooler even at high speeds.
Cage Materials: Equipped with a (M) Machined Brass, (E) Sheet Steel and (TVH, ETN9, TN) Plyamide (Nylon) for high strength and durability in demanding industrial environments.
Applications: Ideal for machine and heavy industrial applications where shaft alignment is difficult to maintain and where you have high radial loads and moderate to high speeds.
SERIES TYPE
- 1200 Series (Light): Optimized for higher speeds, lighter loads, and typical alignment corrections up to 2.5°.
- 1300 Series (Medium): Features a heavier cross-section with thicker rings and larger balls, allowing dynamic corrections up to 3.0°.
- 2200 Series (Light-Wide): Wider profile designed to fit double rows of balls with increased radial load capacities.
- 2300 Series (Medium-Wide): Delivers the highest radial capacity in this category, designed for aggressive heavy machinery environments.
MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.
- Manufacturer:
- NSK
- Series:
- 2300
- Configuration:
- OPEN-No Seals
- Type:
- Tapered Bore
- Material:
- Steel Cage
- Inside Diameter:
- 95MM
- Outside Diameter:
- 200MM
- Width:
- 67MM
