Catalog Number: T75004289
OEM Number: 132537TB
Industry Part Number: 132537
PRODUCT TYPE: Radial Shaft Seal
Seal Profile: WBS
Lip/Base Material: 70 Nitrile Black
Commodity Code: 8487900080
Country of Origin: Taiwan
PRODUCT SPECIFICATIONS
- Series: WBS
- Type: Single Lip
- Inside Diameter: 1.375 Inch
- Outside Diameter: 2.502 Inch
- Width: 0.375 Inch
- Material: 70 Nitrile Black
DESIGN SPECIFICATIONS
- With tension spring
- Without protective lip
- Open metallic outer jacket
- Sealing material: NBR, FKM
- Material stiffening plate: Unalloyed steel DIN EN
- 10139 (DIN 1624)
- Spring material: Spring steel DIN EN 10270-1
FUNCTION
- Dynamic sealing of rotating shafts, independent of direction of rotation
- Good static seal between sealing lip and shaft at standstill
- Metallic outer jacket ensures tight and precise fit
- Limited sealing of low-viscosity and gaseous media and in split housings
PRODUCT ADVANTAGES
- Tight and precise fit
- Long service life
- Reliable design with broad application spectrum for moderately demanding applications in general industry
- Good price/performance ratio
- Manufactured by certified external suppliers
COMMON APPLICATIONS
- Sealing of rotating machine elements (shafts, hubs, axles)
- Use with pressurization
APPLICATION LIMITS
Pressure [Mpa]: max..05
The values given here are maximum values and may not all be reached at the same time
NBR
- Temperature [°C]: -40 to 80, short-term up to 100
- Peripheral speed [m/s]: max.10
FKM
- Temperature [°C]: -25 to 150
- Peripheral speed [m/s]: max.34
MEDIA RESISTANCE
NBR
- Good chemical resistance to various mineral oil and greases (H, HL, HLP)
- Flame-retardant hydraulic fluids HFA and HFB, HFC up to appr.+50°C
- Water up to max.+60°C
- Low resistance to ozone, weathering and ageing
FKM
- Good chemical resistance to mineral oils and greases, synthetic oils and greases, engine, gearbox and ATF oils up to approx.+150 °C
- Fuels, flame-retardant pressure fluids HFD, aliphatic, aromatic and chlorinated hydrocarbons
- Water up to max.+60°C
- Very good resistance to ozone, weathering and ageing
DESIGN GUIDELINE
- Stiffening ring non-alloy steel according to DIN EN 10139
- Design of the installation space is recommended in accordance with DIN 3760
- Roundness of shaft - tolerance class IT8 - free of twists, burrs and damage of any kind
- Shaft surface roughness Rz = 1.0 to 4.0 ?m
- Hardness of shaft surface min.45 HRC
- Housing surface roughness Rz = 10 to 20 ?m
- Shaft tolerance zone: ISO h11
- Housing tolerance zone: ISO H8
INSTALLATION GUIDELINE
- Clean the installation space carefully before installation, remove dust, dirt, metal chips, etc
- Do not pull the seal over sharp edges, threaded tips or cavities (feather key grooves) during installation, cover with a mounting sleeve if necessary
- Do not grease the seal or installation space for assembly
- Careful installation on the shaft, tilting is not permitted
STORAGE ADVISE
- Storage temperature <25°C
- No direct heat sources
- No direct sunlight
- No condensation in the storage room
- No exposure to ozone or ionizing radiation
- Recommendations based on the revision of ISO 2230 dated 16.09.1992
In mechanical equipment, oil seals, also known as grease, fluid, or dirt seals, help keep lubricant from escaping by sealing the gaps between moving and stationary parts.Oil seals are essential parts of almost every kind of equipment and vehicle in use and have optional metric and inch shaft and bore sizes.To produce a tight seal, the sealing lipwhich is frequently composed of rubber or elastomerspresses up against the rotating shaft.Oil seals have optional single lip, double lip and triple lips.Depending on the temperature and chemical resistance requirements of the application, materials such as silicone rubber, nitrile rubber, or fluorocarbon are employed.Oil seals are relatively simple to install and replace, minimizing downtime for maintenance.Maxtran stocks both rubber covered and fully metal options for better structural support and to help secure the seal within the housing.Maxtran.com is the Worlds largest Authorized TCM oil seal distributor offering over 150,000 shaft and bore sizes and sealing lip configurations in various materials for every industrial and automitive application.Every single WB Series Single Lip Garlock 24600-0556 Oil Seal includes free same-day shipping and concierge technical support.This 24600-0556 oil seal is manufactured from 70 Nitrile Black material and has a 1.375 Inch shaft diameter and 2.502 Inch bore diameter and is 0.375 Inch thick.With so many oil seal size options Maxtran is the #1 choice for buying shaft seals in the USA!
- Manufacturer:
- Garlock
- Series:
- WB
- Type:
- Single Lip
- Inside Diameter:
- 1.375 Inch
- Outside Diameter:
- 2.502 Inch
- Width:
- 0.313 Inch
- Material:
- 70 Nitrile Black