CR Seals (SKF) 26373 Double Lip Oil Seal, 2.625 Inch Shaft Diameter, CRWA3 Design, Polyacrylate elastomer (ACM) Material

Chicago Rawhide Part Number: 26373

SKF Part Number: 26373

Design Series: CRWA3

26373, SKF, Radial shaft seal with metal case, SKF Wave lip and auxiliary, non-contacting lip

Radial shaft seal for oil or grease with metal casing, SKF Wave lip , and auxiliary non-contacting lip. Rotating and stationary machine parts, as well as parts moving relative to one another, are sealed by radial shafts. A metal casing and an SKF Wave lip composed of thermoplastic or elastomer with a higher pumping rate are features of CRWA3 seals that minimize heat generation. A garter spring is also included in the seal to maximize sealing against the shaft.

PRODUCT HIGHLIGHTS

• For oil or grease
• A Wave lip with a garter spring increases the pumping pace
• Metal OD and delivers industry's highest pump rate
• The temperature at the contact site is lower with a Wave lip seals, which reduces friction between the shaft and the lip
• motion of this seal generates up to 30% less heat and 20% less friction
• Firm and accurate fit in the housing bore
• Easy installation

CRW1, CRWA1, CRWH1 and CRWHA1 seals

As part of the CR Seals collection, the radial shaft seals CRW1, CRWH1, CRWA1, and CRWHA1—also known as SKF Wave seals—are low-friction seals with an SKF Wave lip design for less heat generation. Refer to the Sealing lip design section for more details. They fit precisely and firmly in the housing bore because to their metal exterior diameter, which also makes installation simple. The CRWA1 and CRWHA1 seals, in particular, which include an auxiliary lip, are ideal for contamination exclusion even though their primary purpose is to retain lubricants. The sealing lips for all of these seals are composed of either nitrile rubber or SKF Duralife, a fluoro rubber combination that was created by SKF.

Key characteristics include

• CRW1: Seal with a single steel case, SKF Wave lip and a carbon steel garter spring
• CRWH1: Seal with a double steel case, SKF Wave lip and a carbon steel garter spring
• CRWA1: Seal with a single steel case, SKF Wave lip , a carbon steel garter spring and an auxiliary, non-contacting lip
• CRWHA1: Seal with a double steel case, SKF Wave lip , a carbon steel garter spring and an auxiliary, non-contacting lip

APPLICATIONS

• Gearboxes
• Hydraulic pumps
• Axles
• Power steering columns
• Speed reducers
• Transmissions

Radial shaft seals are positioned between two components that are moving relative to one another or between fixed and rotating components. They are divided into two major sections. One is a cylindrical outer covering that fits into the housing bore statically and has an interference fit. The second is a sealing lip that seals against the shaft both statically and dynamically. With a predetermined radial load, its sealing edge presses up against the shaft's counterface surface. There are numerous uses for Maxtran's radial shaft seals. Both SKF and users are significantly interested in standardizing due to the significance of radial shaft seals for machine operational dependability and service life. For the widest selection of oil seal sizes and materials, you can rely on Maxtran.

This 26373, SKF, Radial shaft seal with metal case, SKF Wave lip and auxiliary, non-contacting lip oil seal sold by Maxtran is manufactured by Chicago Rawhide, an SKF company from high quality materials. This SKF Radial shaft seal has a Polyacrylate elastomer (ACM) Double lip and is designed with a CRWA3 lip profile. This 26373 oil seal can be used where fitament requires a 2.625 Inch shaft and 4.563 Inch outside diameter rotary seal needing a 0.719 Inch overall seal thickness.