ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE PRODUCT

X-Ring Size AS568-146 N70R Equivalent to Fruedenberg 75172489 X-Ring

OUR PRICE $1.23
RETAIL $2.87
COMPETITOR $1.72
(You save $1.64 )
In Stock
(0) Write a Review
SKU:
MXT775056
Availability:
SHIPS IN 2-3 BUSINESS DAYS
Weight:
0.06 LBS
Minimum Purchase:
12 units
Shipping:
Calculated at Checkout
Adding to cart… The item has been added



Catalog Number: T-75172489

OEM Number: Q-146 N70R

PRODUCT TYPE: X-Ring

Seal Profile: XR

Lip/Base Material: 70 Nitrile

PRODUCT SPECIFICATIONS
  • Series: XR
  • Inside Diameter: 2.612 Inch
  • Width: 0.103 Inch
  • Material: 70 Nitrile
DESIGN SPECIFICATIONS
  • Optimized sealing effect (good pressure distribution over square cross-section)
  • Low friction due to lower contact forces lubricant depot possible between the sealing lips
  • High stability in dynamic applications due to almost square cross-section
  • Lower radial preload required
  • No interference by separation rate
FUNCTION
  • Sealing effect due to cross-sectional deformation after installation and axial or radial compression in the installation space
  • In the operating state, media pressure reinforces the sealing function
PRODUCT ADVANTAGES
  • Optimized sealing effect (good pressure distribution over square cross-section)
  • Low friction due to lower contact forces
  • Lubricant depot possible between the sealing lips
  • High stability in dynamic applications due to almost square cross-section
  • Lower radial preload required
  • No interference by separation rate
  • Reliable design with broad application spectrum for moderately demanding applications in general industry
  • Good price/performance ratio
  • Manufactured by certified external suppliers
COMMON APPLICATIONS
  • Reciprocal, rotating and superimposed screw movements
  • Stationary machine and system parts against liquid and gaseous media
  • Comparable in handling and application to o-rings
  • Sealing of pressures up to 1000 bar,
APPLICATION LIMITS
At pressures of 5 - 40 MPa in static application or 5 - 20 MPa with oscillating movement, retainer rings must be used
Translational speed ? 0.5 m/s, circumferential speed ? 2 m/s
Pressure [Mpa]: max.5
The values given here are maximum values and may not all be reached at the same time
NBR
  • Temperature [°C]: -30 to 100
FKM
  • Temperature [°C]: -20 to 200
MEDIA RESISTANCE
NBR
  • Good chemical resistance to various mineral oils and greases (H, HL, HLP)
  • Flame-retardant hydraulic fluids HFA and HFB, HFC up to appr.+50°C
  • Water up to max.+60°C
>FKM
  • Good chemical resistance to mineral oils and greases, synthetic oils and greases, engine, gearbox and ATF oils up to approx.+150 °C
  • Fuels, flame-retardant pressure fluids HFD, aliphatic, aromatic and chlorinated hydrocarbons
  • Water up to max.+60°
  • Very good resistance to ozone, weathering and ageing
STORAGE ADVISE
  • Storage temperature <25°C
  • No direct heat sources
  • No direct sunlight
  • No condensation in the storage room
  • No exposure to ozone or ionizing radiation
  • Recommendations based on the revision of ISO 2230 dated 16.09.1992
Maxtran.com is largest distributor of TCM brand X-Rings With millions of AS568 (Inch) sizes in-stock and ready to ship today! The sealing function is strengthened by the medium's pressure during working conditions.TCM brand X-rings are utilized for the static sealing of flanges, sleeves, and covers in both radial and axial directions, as well as the dynamic sealing of pistons, rod seals, rotating shafts, and helical movements.X-rings have a nearly square cross-section profile and are twin-action, four-lipped seals.Installing and compressing inside an axial or radial installation housing creates the sealing effect.Maxtran provides simple online ordering for your AS568-146 X-Rings from the world's largest fluid sealing ring inventory.Get quick delivery, free shipping and expert service with every order.Our AS568-146 X-Rings are manufactured from high grade shore 70 Nitrile extrusion material and bonded to prevent any fluid impregnation into the surfaces.The #146 series X-Rings measure 2.612 Inch shaft diameter and have a 0.103 Inch cross section thickness.
MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.
Series:
AS568-146
Inside Diameter:
2.612 Inch
Width:
0.103 Inch
Material:
70 Nitrile