Transcom® VA-055 Replaces SKF 400550 V-Ring

ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE PRODUCT

VA-055 Direct Fit for SKF 400550 V-Ring

OUR PRICE $5.43
RETAIL $12.92
COMPETITOR $7.60
(You save $7.49 )
Out Of Stock
(0) Write a Review
SKU:
MXT3770
Availability:
CALL 844-329-1777 FOR AVAILABILITY
Weight:
0.10 LBS
Minimum Purchase:
2 units

  •


Catalog Number: 67123505

Transcom Part Number: VA-055

National Original Part Number: 800550

PRODUCT TYPE: V-Rings

Country of Origin: Taiwan

Commodity Code: 4016930062

PRODUCT SPECIFICATIONS
  • Series: VA
  • Inside Diameter: 1.929 Inch
  • Width: 0.354 Inch
  • Material: 60 Nitrile Black
DESIGN SPECIFICATIONS
  • Standard design
  • Stiffening body, joint and sealing lip
  • Material: NBR, FKM
FUNCTION
  • Sealing against dust, dirt, grease, oil or water splashes
  • Protects radial shaft seals or bearings from abrasive ambient conditions as a primary sealing element (lip seal or flinger ring)
  • Good for use in combination with rotary shaft seals
PRODUCT ADVANTAGES
  • Good dynamic sealing effect
  • Compensation of small axial movements as well as angular and radial misalignments
  • Low requirements on surface quality of the mating surface
  • Friction decreases with increasing peripheral speed
  • Reliable design with broad application spectrum for moderately demanding applications in general industry
  • Good price/performance ratio
  • Manufactured by certified external suppliers
COMMON APPLICATIONS
  • General mechanical engineering
  • Plant engineering
  • Drive technology
  • Electric motors
  • Gearboxes
  • Agricultural machinery
  • Rolling mills
  • Bearing pedestal seal
APPLICATION LIMITS
Pressure [Mpa]: max.0
The values given here are maximum values and may not all be reached at the same time
NBR
  • Temperature [°C]: -40 to 100
  • Peripheral speed [m/s]: max.8
  • For circumferential speeds ? 8 m/s, axial securing is required, for ?12 m/s additional radial securing is required
FKM
  • Temperature [°C]: -20 to 200
  • Peripheral speed [m/s]: max.6.5
  • At circumferential speed ? 6.5 m/s, axial securing is required, at ?10 m/s radial securing is also required
MEDIA RESISTANCE
NBR
  • Good chemical resistance to various mineral oil and greases (H, HL, HLP)
  • Flame-retardant hydraulic fluids HFA and HFB, HFC up to appr.+50°C
  • Water up to max.+60°C
  • Low resistance to ozone, weathering and ageing
FKM
  • Good chemical resistance to mineral oils and greases, synthetic oils and greases, engine, gearbox and ATF oils up to approx.+150 °C
  • Fuels, flame-retardant pressure fluids HFD, aliphatic, aromatic and chlorinated hydrocarbons
  • Water up to max.+60°C
  • Very good resistance to ozone, weathering and ageing
DESIGN GUIDELINE
  • Shaft surface roughness Rz = 1.0 to 4.0 ?m
  • No surface shape deviations or defects such as sharp edges, burrs, blowholes, waviness, elevations or damage permitted
  • Chamfer on shaft 10-20°, polished transition
  • Mating surface should be at right angles to the shaft
  • Counterface surface roughness Ra ? 2 ?m
  • Hardness of mating surface depends on the material and medium
  • Shaft tolerance zone: ISO h11
Construction steel and sludge
  • 125 - 150 HV
Grey cast iron and sludge, dust
  • 190 - 270 HV
Cast bronze and water, dust
  • 100- 160 HV
Cast aluminum and splash water
  • 90 - 160 HV
Stainless steel and water
  • 150 - 200 HV
INSTALLATION GUIDELINE
  • Deburr sharp edges, provide with seamless chamfers and radii
  • V-ring can be temporarily expanded by up to 20% for installation
STORAGE ADVISE
  • Storage temperature <25°C
  • No direct heat sources
  • No direct sunlight
  • No condensation in the storage room
  • No exposure to ozone or ionizing radiation
  • Recommendations based on the revision of ISO 2230 dated 16.09.1992
You can use TCM V-rings as flinger rings or lip seals.Their function is to provide a barrier against external sprays of water, oil, grease, dust, and filth.The V-ring axially seals against the counter surface while rotating with the shaft.V-rings serve as a pre-sealing element for bearings and are mostly utilized in conjunction with other seals, such as radial shaft seals.Some important features of TCM brand v-ring seals include their easy mounting and flexible use.They offer reduced running friction with increasing speed and therefore long service life allowing compensation for slight axial movements.Maxtran.com is largest distributor of TCM brand V-Rings With every possible shaft size in-stock and ready to ship today! .Maxtran provides simple online ordering for your SKF 400550 V-Ring from the world's largest fluid sealing ring inventory.Get quick delivery, free shipping and expert service with every order.Our SKF 400550 V-Ring are manufactured from high grade shore 60 Nitrile Black extrusion material and bonded to prevent any fluid impregnation into the surfaces.The VA series V-Rings measure 1.929 Inch shaft diameter and are 0.354 Inch wide making them ideal for many industrial applications
MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.
Series:
VA
Inside Diameter:
1.929 Inch
Width:
0.354 Inch
Material:
60 Nitrile Black

You make also like these

Related Products

!