Catalog Number: T75021832

OEM Number: 32X62X7TC-BX

Industry Part Number: 32X62X7TC-BX

PRODUCT TYPE: Radial Shaft Seal

Seal Profile: WAS

Lip/Base Material: 70 Nitrile Black

Commodity Code: 4016930000

Country of Origin: Taiwan

PRODUCT SPECIFICATIONS

Series: WAS
Type: Double Lip
Inside Diameter: 32MM
Outside Diameter: 62MM
Width: 7MM
Material: 70 Nitrile Black

DESIGN SPECIFICATIONS

Standard design according to DIN 3760
With tension spring
With protective lip
Rubberized outer jacket
Sealing material: NBR, FKM
Material stiffening plate: Unalloyed steel DIN EN 10139 (DIN 1624)
Spring material: Spring steel DIN EN 10270-1

FUNCTION

Dynamic sealing of rotating shafts, independent of direction of rotation
Good static seal between sealing lip and shaft at standstill
Protective lip against dirt accumulation from outside
Rubberized outer jacket ensures tight fit and seal to housing borePRODUCT ADVANTAGES
- Good static sealing effect with low-viscosity or gaseous media
- Low friction
- Compensates for thermal expansion, e.g. in light metal housings, good sealing effect with greater roughness and with split housings
- Long service life
- Reliable design with broad application spectrum for moderately demanding applications in general industry
COMMON APPLICATIONS
- Sealing of rotating machine elements (shafts, hubs, axles)
APPLICATION LIMITS

Pressure [Mpa]: max. 0.05
Peripheral speed [m/s]: max. 8
The values given here are maximum values and may not all be reached at the same time
NBR
- Temperature [°C]: -40 to 80, short-term up to 100
FKM
- Temperature [°C]: -25 to 150
MEDIA RESISTANCE
NBR
- Good chemical resistance to various mineral oil and greases (H, HL, HLP)
- Flame-retardant hydraulic fluids HFA and HFB, HFC up to appr. +50°C
- Water up to max. +60°C
- Low resistance to ozone, weathering and ageing
FKM
- Good chemical resistance to mineral oils and greases, synthetic oils and greases, engine, gearbox and ATF oils up to approx. +150 °C
- Fuels, flame-retardant pressure fluids HFD, aliphatic, aromatic and chlorinated hydrocarbons
- Water up to max. +60°C
- Very good resistance to ozone, weathering and ageing
DESIGN GUIDELINE
- Design of the installation space is recommended in accordance with DIN 3760
- Roundness of shaft - tolerance class IT8 - free of twists, burrs and damage of any kind
- Shaft surface roughness Rz = 1.0 to 4.0 ?m
- Hardness of shaft surface min. 45 HRC
- Housing surface roughness Rz = 10 to 20 ?m
- Shaft tolerance zone: ISO h11
- Housing tolerance zone: ISO H8
INSTALLATION GUIDELINE
- Clean the installation space carefully before installation, remove dust, dirt, metal chips, etc
- Do not pull the seal over sharp edges, threaded tips or cavities (feather key grooves) during installation, cover with a mounting sleeve if necessary
- Do not grease the seal or installation space for assembly
- Careful installation on the shaft, tilting is not permitted

MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.