Catalog Number: T-67044078

OEM Number: AM43-70X80X7F

PRODUCT TYPE: Single Wiper

Seal Profile: AM43

Lip/Base Material: 90 Viton

PRODUCT SPECIFICATIONS

Series: AM43
Inside Diameter: 2.756 Inch
Outside Diameter: 3.15 Inch
Material: 90 Viton

DESIGN SPECIFICATIONS

Single acting
Protruding wiper lip
Vulcanized metal angle ring
Sealing material: FKM
Reinforcement material: Unalloyed steel DIN EN 10139 (DIN 1624)
Material: NBR, FKM, TPU

FUNCTION

Wiping off impurities on the piston rod during the retraction movement
Reduction of residual oil film due to second lip<
Metal angle ring ensures good fit in the installation space and prevents twisting

PRODUCT ADVANTAGES

Higher sealing effect on the outer diameter due to encasing of the stiffening ring
Good wiping properties against dirt
No pressure relief hole required
Metal stiffening ring ensures functional fit in the installation space
Particularly suitable for high stroke speeds
Metal angle ring offers only a small attack surface for corrosive media
Reliable design with broad application spectrum for moderately demanding applications in general industry
Good price/performance ratio
Manufactured by certified external suppliers

COMMON APPLICATIONS

Hydraulics
Standard cylinders

APPLICATION LIMITS
The values given here are maximum values and may not all be reached at the same time
FKM

Temperature [°C]: -30 to 100
Gliding speed [m/s]: max. 1

MEDIA RESISTANCE
FKM

Hydraulic oils according to DIN 51524 part 1-3
Lubricating oils
Lubricating greases based on minor oils
Flame-retardant hydraulic fluids HFA, HFB, HFC according to VCMA 24317

STORAGE ADVISE

Storage temperature <25°C
No direct heat sources
No direct sunlight
No condensation in the storage room
No exposure to ozone or ionizing radiation
Recommendations based on the revision of ISO 2230 dated 16.09.1992

Wipers are wear-resistant, long-lasting and keep dust and dirt particles from entering housings. They shield the hydraulic fluid from contaminants in addition to preventing harm to the sealing system. Double-acting wipers also leave behind an extra layer of leftover oil. For high exterior pollution, wipers with metal housings are especially well-suited because of their press-fit design. Numerous wipers that are compatible with a wide range of hydraulic cylinders are available under the TCM product brand. Maxtran. com is the trusted authorized source for TCM Hydraulic Seals Easily shop the largest inventory of TCM AM43 Single Wiper Hydraulic Seals you need at the best deals with free shipping and our 30-day moneyback warranty. Our Single Wiper Seals measure 2. 756 Inch inside shaft diameter by 3. 15 Inch outside bore diameter and are produced from 90 Viton rubber that have excellent resistance to hydraulic fluids, oils, lubricants, and greases

MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.