Catalog Number: T-75183656

OEM Number: 8600-0500F1

PRODUCT TYPE: SIngle Wiper

Seal Profile: AD48

Lip/Base Material: 90 Viton

PRODUCT SPECIFICATIONS

Series: AD48
Inside Diameter: 5 Inch
Outside Diameter: 5.5 Inch
Material: 90 Viton

DESIGN SPECIFICATIONS

Double-acting
Protruding wiper lip
Without metal angle ring
Additional diameter step on the outer seat
Material: NBR, FKM, TPU

FUNCTION

Wiping off impurities on the piston rod during the retraction movement
Reduction of residual oil film due to second lip<
Pressure relief hole recommended for return of residual oil

PRODUCT ADVANTAGES

Additional diameter step on the outer seat leads to stronger sealing and wiping effect
Good wiping properties against dirt
Particularly suitable for high stroke speeds
Reliable design with broad application spectrum for moderately demanding applications in general industry
Good price/performance ratio
Manufactured by certified external suppliers

COMMON APPLICATIONS

Particularly suitable for piston rods with high stroke speeds

APPLICATION LIMITS
The values given here are maximum values and may not all be reached at the same time
FKM

Temperature [°C]: -30 to 100
Gliding speed [m/s]: max. 1

MEDIA RESISTANCE
FKM

Hydraulic oils according to DIN 51524 part 1-3
Lubricating oils
Lubricating greases based on minor oils
Flame-retardant hydraulic fluids HFA, HFB, HFC according to VCMA 24317

STORAGE ADVISE

Storage temperature <25°C
No direct heat sources
No direct sunlight
No condensation in the storage room
No exposure to ozone or ionizing radiation
Recommendations based on the revision of ISO 2230 dated 16.09.1992

Wipers are wear-resistant, long-lasting and keep dust and dirt particles from entering housings. They shield the hydraulic fluid from contaminants in addition to preventing harm to the sealing system. Double-acting wipers also leave behind an extra layer of leftover oil. For high exterior pollution, wipers with metal housings are especially well-suited because of their press-fit design. Numerous wipers that are compatible with a wide range of hydraulic cylinders are available under the TCM product brand. Maxtran. com is the trusted authorized source for TCM Hydraulic Seals Easily shop the largest inventory of TCM AD48 Single Wiper Hydraulic Seals you need at the best deals with free shipping and our 30-day moneyback warranty. Our Single Wiper Seals measure 5 Inch inside shaft diameter by 5. 5 Inch outside bore diameter and are produced from 90 Viton rubber that have excellent resistance to hydraulic fluids, oils, lubricants, and greases

MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.