Manufacturer Part Number: QJ215-XL-MPA
**NOTE** If predominantly radial load is present, four point contact bearings should not be used due to the higher friction in the four point contact.
PRODUCT HIGHLIGHTS
**NOTE** If predominantly radial load is present, four point contact bearings should not be used due to the higher friction in the four point contact.
PRODUCT HIGHLIGHTS
- Large contact angle on both sides
- Support alternating, pure axial or predominantly axial loads
- Similar in their structure to double row angular contact ball bearings
- Narrower in an axial direction due to only one raceway groove
- Under radial load the balls are in contact with the rings at 4-points
- Only used under predominantly axial load
- Inner ring is split in order to allow filling with the balls
- Often combined with a radial bearing and used as an axial bearing with radial clearance in a housing
- Used where axial loads are present in both directions and close axial guidance is required
MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.
- Inside Diameter:
- 111.5MM
- Manufacturer:
- FAG
- Outside Diameter:
- 130MM
- Series:
- QJ200
- Width:
- 25MM
- Pitch:
- 35° Contact Angle
- Material:
- Brass Cage
- Configuration:
- Single Bearing
