Manufacturer Part Number: 4314-B-TVH
PRODUCT HIGHLIGHTS
PRODUCT HIGHLIGHTS
- Force is transmitted from one raceway to the other at a specific contact angle
- Suitable for radial and axial loads acting simultaneously
- Available in a single row design as well as in a double row design
- Single bearings or as a pair of universal bearings
- Bearing arrangements must support combined loads
- Moderate to high axial loads are present on one side
- Rigid axial guidance is required
- Bearing arrangement must be axially clearance-free or preloaded
- High speeds are required under higher radial and axial loads
- The design envelope is not sufficient under high loads for a pair of single row angular contact ball bearings
- High radial and axial loads are acting simultaneously
- Tilting moments must also be supported
- Relatively rigid bearing arrangement is required
MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.
- Manufacturer:
- FAG
- Inside Diameter:
- 70MM
- Outside Diameter:
- 150MM
- Series:
- 4300-B
- Width:
- 51MM
- Configuration:
- OPEN-No Seals
- Pitch:
- 0° Contact Angle
- Material:
- Polyamide Cage
