Manufacturer Model #: 42E361W976H2
MOTOR ENCLOSURE DESIGNATIONS
MOTOR ENCLOSURE DESIGNATIONS
- DP (Drip Proof)
- ODP (Open Drip Proof)
- ODTF (Open Drip Proof Tandem Fan)
- OPSB (Open Slotted Band)
- TEAO (Totally Enclosed Air Over)
- TEFC (Totally Enclosed Fan Cooled)
- TENV (Totally Enclosed Non Ventilated)
- XPFC (Explosion Proof Fan Cooled)
- Use on fire pumps installed per NFPA-20
- All motors meet UL requirements (File # E481231) in open drip proof enclosures
- Designed for relatively clean and dry environments
- Foot mounted motors are available from stock in ratings of 10-300 Horsepower
- Close coupled pump designs are available from stock in rating of 10-100 HP
- UL File E481231
- 50/60 Hertz
- 200/400V, 230/460V, 460V
- Rolled Steel and Cast Iron Frames
- Exterior Red Paint RAL3002
- Class F Insulation system
- 1.15 Service Factor, 40° C ambient continuous
- Dual voltage motors 20 Hp and larger have 12 leads, suitable for wye-delta or across the line start on either voltage or part winding start on low voltage
- Single voltage motors have 12 leads and are suitable for wye-delta, across the line or part winding start
- Fire Pump motors are not recommended for use with variable frequency drives
- UL listed Fire Pump motors installed per NFPA-20
- Fire Suppression
- Product Type: Three Phase
- HP: 75
- RPM: 3535
- Volts: 230/460
- Amps: 84/82/168/164
- Hz: 60
- Phase: 3
- Frame: 364JP
- Enclosure Type: OPSB (Open Slotted Band)
- Enclosure Material: Steel
- Mounting: C-Face
- Shaft Diameter: 2.125"
- Overall Length: 32.5"
- Rotation: Reversible
- Number of Speeds: 1
- Service Factor: 1.15
- Bearings: Ball
- Efficiency: 93.0%
- Maximum Ambient Temperature: 40° C
- Insulation Class: F
- Duty Cycle: Continuous
- Manufacturer Model #: 42E361W976H2
- Ship Weight: 472 lbs.
Any damage to motors sent by any carrier is not Maxtran's responsibility. In order for us to assess the problem, please check your order when it is delivered and get in touch with us right away if anything is broken, defective, or incorrect. Claims must be made directly to the shipper or to the entity that caused the damage. Returns are accepted by Baldor up to four (4) months after the original purchase date. Please get in touch with us via your purchase to seek a Return Authorization if you need to return an item. Returning the item you have and then buying a new one separately after the return is approved is the quickest approach to be sure you get what you want. after the object or items are returned in its original state, examined by a Baldor representative, and approved for disposal. You will automatically get a refund using the original payment method, including with any applicable restock fees, if the item is accepted upon arrival and inspection. Please keep in mind that processing and posting the refund may take some time for your bank or credit card company.Maxtran will reimburse the item or items' original cost less a 20% restocking fee. An RMA is required for all returns. Returns are only allowed for manufacturing defects and product damage. A Restock Fee of 20% will be charged for all approved motor returns. All Shipping is non-refundable and any return shipping is the customers responsibility.
- Type:
- 75 HP
- Series:
- 3 Phase [230/460 Volt]
- Configuration:
- 364JP C-Face [No Base] OPSB
- Material:
- Steel
- Width:
- 2.125 Inch Shaft
- Length:
- 32.5 Inch
- Manufacturer:
- Baldor
