Manufacturer Model #: 35E4315P250G1
MOTOR ENCLOSURE DESIGNATIONS
MOTOR ENCLOSURE DESIGNATIONS
- DP (Drip Proof)
- ODP (Open Drip Proof)
- ODTF (Open Drip Proof Tandem Fan)
- OPSB (Open Slotted Band)
- TEAO (Totally Enclosed Air Over)
- TEFC (Totally Enclosed Fan Cooled)
- TENV (Totally Enclosed Non Ventilated)
- XPFC (Explosion Proof Fan Cooled)
- 5 600 hp
- 184T 586 NEMA frame
- Foot mounted, 460 and 575 volt design
- Totally enclosed fan cooled cast iron construction minimizes vibration and bearing temperature for longer life
- High torque NEMA Design A, exceeds NEMA design C torques
- Exceptional performance and long life in harsh industrial processing applications
- Protects against contamination, moisture, vibration and demanding duty cycles
- Rugged lifting provisions
- Oversized conduit boxes
- Safer connections
- Clamp-type grounding lug
- Permanently labeled color leads
- Division 2 for hazardous locations
- Lead separators on all severe duty ratings protect against shorts and abrasion of power leads
- Rated for severe duty service and high starting torques
- Belt driven rock crushers
- Pellet mills
- High starting torque applications
- Feeders, stackers and overland conveyors
- Screen decks
- Augers and screw conveyors
- Log washers
- Compressors
- Pumps
- Fans
- Conveyors
- Gear Reducers
- Chemical Industry
- Oil & Gas Industry
- Forest Products Industry
- Cement & Aggregate Industry
- Mining Industry
- Metals Industry
- Water & Waste Water Industry
- Aggregate & Cement
- Above ground mining
- Bulk material handling
- Product Type: Three Phase
- HP: 3/4
- RPM: 1160
- Volts: 230/460
- Amps: 2.8/1.4
- Hz: 60
- Phase: 3
- Frame: 56C
- Enclosure Type: TEFC (Totally Enclosed Fan Cooled)
- Enclosure Material: Steel
- Mounting: C-Face/Rigid
- Shaft Diameter: 0.625"
- Overall Length: 12.28"
- Rotation: Reversible
- Number of Speeds: 1
- Service Factor: 1.15
- Bearings: Sealed
- Efficiency: 78.5%
- Maximum Ambient Temperature: 40° C
- Insulation Class: F
- Duty Cycle: Continuous
- Manufacturer Model #: 35E4315P250G1
- Ship Weight: 38 lbs.
Any damage to motors sent by any carrier is not Maxtran's responsibility. In order for us to assess the problem, please check your order when it is delivered and get in touch with us right away if anything is broken, defective, or incorrect. Claims must be made directly to the shipper or to the entity that caused the damage. Returns are accepted by Baldor up to four (4) months after the original purchase date. Please get in touch with us via your purchase to seek a Return Authorization if you need to return an item. Returning the item you have and then buying a new one separately after the return is approved is the quickest approach to be sure you get what you want. after the object or items are returned in its original state, examined by a Baldor representative, and approved for disposal. You will automatically get a refund using the original payment method, including with any applicable restock fees, if the item is accepted upon arrival and inspection. Please keep in mind that processing and posting the refund may take some time for your bank or credit card company.Maxtran will reimburse the item or items' original cost less a 20% restocking fee. An RMA is required for all returns. Returns are only allowed for manufacturing defects and product damage. A Restock Fee of 20% will be charged for all approved motor returns. All Shipping is non-refundable and any return shipping is the customers responsibility.
- Type:
- 3/4 HP
- Series:
- 3 Phase [230/460 Volt]
- Configuration:
- 56C C-Face [Rigid Base] TEFC
- Material:
- Steel
- Width:
- 0.625 Inch Shaft
- Length:
- 12.28 Inch
- Manufacturer:
- Baldor
