Megadyne Part Number: 3600TTM8M22
Synchronous Belts are specified by pitch length, tooth pitch and belt width in millimeters. Example: 1440TTM8M36
TRADENAME: Isoran RPC Titanium / MEGASYNC® TITANIUM
PRODUCT HIGHLIGHTS
APPLICATIONS
Synchronous Belts are specified by pitch length, tooth pitch and belt width in millimeters. Example: 1440TTM8M36
TRADENAME: Isoran RPC Titanium / MEGASYNC® TITANIUM
PRODUCT HIGHLIGHTS
- RPC Tooth Profile Compatible with Poly Chain, RPP, HTD, PCGT and PowerGrip GT 2 pulleys
- Highest Power Capacity
- Improved torque carrying capacity and tooth shear resistance
- Special film provides self-lubricating properties
- Long lasting durability and antistatic properties
- Low friction, increased drive efficiency with less sprocket wearExtremely accurate tooth meshing resulting in the reduction of abrasion, vibrations, & noise
- Tooth Pitch Codes: TTM8 and TTM14
- Greater Length Range
- Superior resistance to flex fatigue
- High Temperature Capability
- Operating Temperatures: -40 °F up to +248 °F (Max peak +284°F for short periods of time)
- HNBR Rubber Construction for Better flexibility than polyurethane belts
- On average lasts 3-4 times longer than roller chain
- Does not require lubrication nor frequent re-tensioning
- Highly resistant to mineral oils and abrasion
Reduced belt and pulley width produce less noise, reduces drive weight, bearing load and cost, with increased efficiency and energy savings
- BELT BODY: HNBR Elastomer uniquely cross-linked to increase tooth rigidity & durability
- CORDS: 100% carbon, the cord provides extreme dimensional stability (no stretch) under static and dynamic operational loads.
- TOOTH FACING FABRIC: High-performing special fabric bonded to the tooth surface
- Conforms to ARPM IP-27 and ISO 13050 standards
APPLICATIONS
- Drives requiring maximum efficiency and the highest power capacity.
- General industrial equipment
- Conveyors
- Industrial equipment
- Machine tools
- Hand power tools
MAXTRAN® offers a 30-Day, 100% Quality Guarantee Against Material and Manufacturing Defects Only, No Exceptions. All Claims must be made within 72-Hours of receiving your parts. MAXTRAN® is not responsible for Shipping Carrier damage or lost shipments. It is the customers responsibility to file a claim with the shipping carrier. No additIonal or implied warranties for this product are offered by MAXTRAN®. An RGA is required for all returns. We do not offer refunds without a replacement order of equal or greater value from the original order. If products are out-of-stock when a replacement is needed a store credit will be issued. Returns are only allowed for manufacturing defects and product damage. A 30% Restock Fee will be charged for all approved returns unless the product is dispositioned to be defective by our Quality Manager . All Shipping is non-refundable and any return shipping to our warehouse is the customers responsibility.
- Manufacturer:
- Megadyne-Jason
- Series:
- TTM8M
- Length:
- 3600MM
- Width:
- 22MM
- Tooth Count:
- 450
- Material:
- HNBR-Nylon
- Pitch:
- 8MM
